Der Artikel wurde erfolgreich hinzugefügt.
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV

incl. 2x AAA batteries

Tracks the voltage.

Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Bookmark
Icon_1000V_AC_1500V_DC Icon_CAT_IV Icon_Drehfeld_L1_L2 Icon_FI_Ausloeser Icon_Safety_Function Icon_Solar_1500V_DC Icon_Ton
                   
: Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV : Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
  • Artikel-Nr.: 45217
  Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV
Best.-Nr. 45217
EAN 4010995452179
Battery type (IEC designation) 2x AAA batteries
Voltage V AC min – max 0,5 - 1000
Voltage V DC min – max 0,5 - 1500
Contamination level 2
Remote voltage test Yes
ATEX approval No
Photovoltaic-compatible Yes
eMobility-compatible No
Integrated flashlight Yes
FI check Yes
Display LCD LED
Protection class IP IP64
Rotation field indication LED L, R
Continuity check LED and audible tone
Operating temperature min - max (°C) -15 - 50
Storage temperature min (°C) -20 °C
Height above sea level 2000 m
Einpolige Phasenpruefung min - max (V AC) 100 - 700
Rotation field test 170 - 7,000 V phase to phase AC 40-70 Hz
Permeability test Measuring range 0 - 500 kΩ + 50%
LED ELV display > 50 V AC, > 120 V DC
LCD range 0,5 V - 1,000 V AC, 0,5 V - 1,500 V DC
LCD resolution 0,1 V (< 10 V) und 1 V (> 10 V)
LCD precision +/- 3 %, +/- 3 digit (< 10 V) and +/- 3 %, +/- 5 digit (> 10 V)
LCD overflow display OL
Inherent time (s) < 0,5 s LED and < 1 s LCD
Safety circuit (mA) Is < 3,5 mA (at 1,000 V)
Measuring mode 30 s ON (operating time), 240 s OFF (recovery time)
Battery consumption (mA) 80 mA
Humidity RH max (%) 85 %
Acoustic signal Yes
Overall length (mm) 282
Einpolige Phasenpruefung min - max (Hz) 40 - 70
Product benefits
benefit-icon
Suitable for photovoltaic systems
benefit-icon
One-handed test
benefit-icon
FI load buttons
Description
Menü schließen
Product description
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. Plus, resistance measurements and frequency measurements can also be conducted. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.
Dimensions
240 x 75 x 30 mm
Measuring category
CAT III 1.000 V / CAT IV 600 V
Standards
IEC/EN 61243-3:2014, IP64, CE
Application
To determine zero voltage. For standardized voltage testing, continuity testing, rotational field testing and resistance testing incl. FI protective switch measurement.
Available downloads:
Diese Website benutzt Cookies, die für den technischen Betrieb der Website erforderlich sind und stets gesetzt werden. Andere Cookies, die den Komfort bei Benutzung dieser Website erhöhen, der Direktwerbung dienen oder die Interaktion mit anderen Websites und sozialen Netzwerken vereinfachen sollen, werden nur mit Ihrer Zustimmung gesetzt.
Ablehnen Accept