Article successfully added.
L-key set in ErgoStar holder
MagicRing® hexagonal ball end, 13-pcs. in inch design, matt chrome-plated in SB-cardboard packaging
Bookmark
- Order number: 43852
Product benefits
Makes handling easier
Always the correct key when you need it.
Simplifies your work
The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Increases your efficiency
Wiha MagicRing® holding feature holds all hex screws in place without a magnet.
Lowers your costs
Highly durable thanks to high-quality, chrome-plated L-key surface to prevent corrosion.
Set constituent
- 1x L-keys Matt chrome-plated hexagonal ball end in inch design 0,05" x 72 mm (29471)
- 1x L-keys Matt chrome-plated hexagonal ball end in inch design 1/16" x 80 mm (29472)
- 1x L-keys Matt chrome-plated hexagonal ball end in inch design 5/64" x 88 mm (29474)
- 1x L-keys Matt chrome-plated hexagonal ball end in inch design 3/32" x 101 mm (29473)
- 1x L-keys Matt chrome-plated hexagonal ball end in inch design 7/64" x 111 mm (29475)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 1/8" x 121 mm (24302)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 9/64" x 136 mm (24304)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 5/32" x 148 mm (24303)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 3/16" x 163 mm (24305)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 7/32" x 176 mm (24306)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 1/4" x 191 mm (24307)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 5/16" x 210 mm (24308)
- 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 3/8" x 232 mm (24341)
- 1x ErgoStar holder
Description
- Product description
- It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicRing® holding feature (from 1/8") with its spring steel ring, the L-keys hold all hex inch screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains 13 hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder. The matt chrome-plated chrome vanadium steel guarantees robustness and a long service life.
- Product dimensions
- 342 x 45 x 130 mm (LxWxD)
- Standards
- Based on ASME B18.3.
- Application
- Ideal for tightening or loosening all hex screws in hard-to-reach places, removing countersunk inch screws and inserting and screwing into horizontal, inclined or deep tapped blind holes.
Available downloads: