Der Artikel wurde erfolgreich hinzugefügt.
L-key set in ErgoStar holder
Hexagonal ball end MagicRing® matt chrome-plated 10-pcs.
Perfekte Ordnung, wenn's schnell gehen muss.
Bookmark
- Artikel-Nr.: 37351
Product benefits
Quick removal: turn the L-key and pull it out
High-quality chromed surface
Perfect for confined spaces thanks to ball end
Nonmagnetic holding feature
Set constituent
- 1x L-keys Hexagonal ball end matt chrome-plated 1.5 mm x 91 mm (01392)
- 1x L-keys Hexagonal ball end matt chrome-plated 2.0 mm x 101 mm (01393)
- 1x L-keys Hexagonal ball end matt chrome-plated 2.5 mm x 113 mm (01395)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 3.0 mm x 128 mm (20549)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 4.0 mm x 142 mm (20550)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 5.0 mm x 163 mm (20570)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 6.0 mm x 184 mm (20551)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 8.0 mm x 206 mm (20552)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 10.0 mm x 231 mm (20553)
- 1x ErgoStar holder
Description
- Product description
- It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicRing® holding feature (from size 3) with its spring steel ring, the L-keys hold all standard hex screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains nine hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder. The matt chrome-plated chrome vanadium steel guarantees robustness and a long service life.
- Product dimensions
- 231 x 35 x 73 mm (LxWxD)
- Standards
- Based on ISO 2936L.
- Application
- Ideal for tightening or loosening all hex screws in hard-to-reach places, removing standard countersunk screws and inserting and screwing into horizontal, inclined or deep tapped blind holes.